Skip Navigation Links.
Expand AlloysAlloys
Collapse EquipmentEquipment
Collapse Gas ControlGas Control
Expand Single Stage PressureSingle Stage Pressure
Expand Single Stage High PerformanceSingle Stage High Performance
Expand Single Stage Pipeline or StationSingle Stage Pipeline or Station
Expand Two StageTwo Stage
Expand Flow Gauge RegulatorsFlow Gauge Regulators
Expand Flowmeter RegulatorsFlowmeter Regulators
Expand Electrically HeatedElectrically Heated
Collapse Inert Gas GuardsInert Gas Guards
Model 351
Model 353
Model 603
Model 803P
Model 651
Model 653
Expand ManifoldsManifolds
Expand Point-of-usage UnitsPoint-of-usage Units
Expand TorchesTorches
Expand Tips & MixersTips & Mixers
Expand MachinesMachines
Expand Specialty Gas EquipmentSpecialty Gas Equipment
Expand AccessoriesAccessories
Expand IndustriesIndustries
Model 803P

Where to buy this product

Model 803P

Description: Inert gas guard

Harris Inert Gas Guards are designed to save shielding gases by reducing the gas surge when a MIG gun or TIG torch is activated. Because they are designed to reduce the pressure held in supply hose, gas waste is reduced when the gun or torch is triggered. They save shielding gases also by delivering a controlled flow rate. Operators will typically set shielding gas flow rates higher than necessary for a welding operation. Once set by a supervisor, the Inert Gas Guard delivers the precise amount of flow for the operation, eliminating the needless waste of gas.

Typical Application:  Gas saving

Flow Control
Pressure Control
  • Part NumberModel NumberStageGasInletOutletAvailability
    Carbon Dioxide
    Carbon Dioxide
    G 3/8"-RH-UNI ISO 228G 3/8"A-RH-UNI ISO 228
    Carbon Dioxide
    G 3/8"-RH-UNI ISO 228G 3/8" A-RH-UNI ISO 228UK
  • Part NumberMax Inlet PressureDelivery Pressure RangeHeightWidthLengthWeightPressureCv
    803P-00115 bar0.6-0.9 bar102 mm101.5 mm57 mm0.8 kg0.5-0.9 bar0.09
    803P-00215 bar0.6-0.9 bar102 mm101.5 mm57 mm0.8 kg0.5-0.9 bar0.09