24 March
Cutting metal with an oxy-fuel torch
By Harris Products Group

Can titanium be cut with an oxy-fuel torch?

Titanium can be cut with an oxy-fuel torch as long as you take certain precautions to protect yourself and your work area.

Read more...
29 December
Machine cutting torches
By Harris Products Group

How to Use a Cutting Torch Tip Chart

Next to the manufacturer's operation manual and safety guidelines, the cutting tip chart is the next important printed advice for having a safe, great hand cutting torch experience. If you are having trouble lighting a torch, correctly adjusting the flame or the torch just will not stay lit, the cutting tip chart contains the most likely answers and is a good starting point.

Read more...
20 July
Harris Flashback Arrestors
By Harris Products Group

The What, Where, and When of Hose Type Flashback Arrestors

Flashback arrestors and check valves are safety devices designed for oxy-fuel systems to prevent or control damage from an occurrence like a flashback. They are used to prevent damage to equipment, but more importantly, to prevent personal injury.

Read more...
25 May
Harris cutting torch
By Harris Products Group

Which gas do you turn off first?

"Which gas do you turn off first?" We get this question a lot out in the field, and it's a good one. This blog entry outlines our recommendations for proper shut down of an oxy-fuel torch.

Read more...
01 April
Cutting on the plant floor
By Harris Products Group

Changing Just the Tip is Not Enough

If you are using an alternate fuel with equipment specifically designed for acetylene, you may not be realizing all the benefits of an alternate fuel. It often takes more than just changing the tip.

Read more...