Low Fuming Bronze (Bare)
PN: 00015310




Where to buy this product
 

   

Low Fuming Bronze 15 (Bare)

Description: Low-fuming Bronze Welding Alloy

A low-fuming bronze alloy for torch brazing.

Typical Application:  Braze welding steel, cast iron and copper. May be used with standard oxy-fuel torch.

Welding
  • Procedure:
    • Clean braze area
    • Remove all rust, oil and grease
    • Heavy sections should be beveled
    • When applying the bare rod, use a neutral flame with Harris 600 flux
    • The alloy should be applied by a brazing technique with a neutral flame
    • Flux residue shoud be removed by wire brushing with hot water
    Features:
    • Tensile strength - Up to 65,000 psi
    • Flux coating provides excellent wetting action with no objectable fuming
    • Brazing temperature range - 1670° F to 1750° F
    • Good machinability
    • Porosity - free deposits
    • Color matches yellow brass
    Part NumberSize
    17074,0 X 1000 MM
    17063,0 X 1000 MM
  • Chemical CompositionSolidusLiquidusRecommended Joint ClearanceAWSShielding Gas
    Si - 0.04-0.15%
    Fe - 0.25-1.2%
    Cu - 56-60%
    Mg - 0.01-0.05%
    Zn - Rem%
    Al - 0.01*%
    Sn - 0.08-1.1%
    Pb - 0.05*%
    Others - 0.5*%
    1630°F (888°C) 1650°F (889°C)Heavy sections should be beveled.AWS A5.8 RBCuZn-CNeutral Flame
  • Welding ParametersWelding ParametersFiller Metal Selection ChartSpec Sheet